“Dynamic system multivariate calibration by system identification methods”

Authors: Rolf Ergon,
Affiliation: Telemark University College
Reference: 1998, Vol 19, No 2, pp. 77-97.

Keywords: Estimation, system identification, multivariate calibration

Abstract: In the first part of the paper, the optimal estimator for normally nonmeasured primary outputs from a linear and time invariant dynamic system is developed. The estimator is based on an underlying Kalman filter, utilizing all available information in known inputs and measured secondary outputs. Assuming sufficient experimental data, the optimal estimator can be identified by specifying an output error model in a standard prediction error identification method. It is further shown that static estimators found by the ordinary least squares method or multivariate calibration by means of principal component regression (PCR) or partial least squares regression (PLSR) can be seen as special cases of the optimal dynamic estimator. Finally, it is shown that dynamic system PCR and PLSR solutions can be developed as special cases of the general estimator for dynamic systems.

PDF PDF (2862 Kb)        DOI: 10.4173/mic.1998.2.2

DOI forward links to this article:
[1] Rolf Ergon and Kim H. Esbensen (2001), doi:10.4173/mic.2001.3.1
[2] Rolf Ergon (2002), doi:10.4173/mic.2002.4.2
[3] Rolf Ergon (1998), doi:10.4173/mic.1998.2.3
[4] Rolf Ergon and Maths Halstensen (2000), doi:10.1002/1099-128X(200009/12)14:5/6<617::AID-CEM618>3.0.CO;2-M
[5] R. Ergon (1999), doi:10.1109/9.754826
[1] BERNTSEN, H. (1988). Utvidet Kalmanfilter og Multivariabel kalibrering, Report STF48 A88019, SINTEF, Trondheim, Norway.
[2] DI RUSCIO, D. (1996). Combined Deterministic and Stochastic System Identification and Realization: DSR - a subspace approach based on observations, Modeling, Identification and Control, Vol. 17, No. 3, pp. 193-230 doi:10.4173/mic.1996.3.3
[3] ERGON, R. DI RUSCIO, D. (1997). Dynamic system calibration by system identification methods, The European Control Conference, ECC97, Brussels, CD file ECC416.pfd.
[4] ERGON, R. (1998). On Primary Output Estimation by use of Secondary Measurements as Input Signals in System Identification, accepted for publication in IEEE Transations on Automatic Control.
[5] ERGON, R. (1998). Static linear regression analysis by use of Kalman filtering formalism, Submitted to IEEE Transactions on Automatic Control.
[6] GRACE, A., LAUB, A.J., LITTLE, J.N. THOMPSON, C.M. (1992). Control System Toolbox for use with Matlab, The MathWorks, Inc.
[7] GOODWIN, G.C. PAYNE, R.L. (1977). Dynamic System Identification, Academic Press, Inc.
[8] GREWAL, M.S. ANDREWS, A.P. (1993). Kalman filtering, Theory and Practice, Prentice-Hall, Inc.
[9] JOHNSON, R.A. WICHERN, D.W. (1992). Applied Multivariate Statistical Analysis, Prentice-Hall, Inc.
[10] KAILATH, T. (1980). Linear Systems, Prentice-Hall. Inc.
[11] LEWIS, F.L. (1986). Optimal Estimation, with an Introduction to Stochastic Control Theory, John Wiley and Sons.
[12] LJUNG, L. (1987). System Identification, Theory for the User, Prentice-Hall, Inc.
[13] LJUNG, L. (1991). System Identification Toolbox for use with Matlab, The MathWorks, Inc.
[14] MARTENS, H. NÆS, T. (1989). Multivariate Calibration, John Wiley and Sons.
[15] MEJDELL, T. ANDERSSON, B.O. (1994). Using temperature profile for product quality estimation on a distillation column, ISA Transactions, Vol. 33, No. 1, pp. 27-34 doi:10.1016/0019-0578(94)90033-7
[16] SÖDERSTRÖM, STOICA, P. (1989). System Identification, Prentice-Hall, Inc.

  title={{Dynamic system multivariate calibration by system identification methods}},
  author={Ergon, Rolf},
  journal={Modeling, Identification and Control},
  publisher={Norwegian Society of Automatic Control}