“Comparing PI Tuning Methods in a Real Benchmark Temperature Control System”

Authors: Finn Haugen,
Affiliation: Telemark University College
Reference: 2010, Vol 31, No 3, pp. 79-91.

Keywords: PI tuning, air heater, Skogestad´s method, Ziegler-Nichols´ methods, Hägglund and Åström´s method, Tyreus-Luyben´s method, Relay method, Setpoint Overshoot method, Good Gain method

Abstract: This paper demonstrates a number of PI controller tuning methods being used to tune a temperature controller for a real air heater. Indices expressing setpoint tracking and disturbance compensation and stability margin (robustness) are calculated. From these indices and a personal impression about how quick a method is to deliver the tuning result and how simple it is to use, a winning method is identified.

PDF PDF (2309 Kb)        DOI: 10.4173/mic.2010.3.1

DOI forward links to this article:
[1] Finn Haugen, Rune Bakke and Bernt Lie (2013), doi:10.4173/mic.2013.3.1
[2] Jietae Lee, Wonhui Cho and Thomas F. Edgar (2013), doi:10.1021/ie4009919
[3] David Di Ruscio (2010), doi:10.4173/mic.2010.4.3
[4] S. Alcántara, R. Vilanova and C. Pedret (2013), doi:10.1016/j.jprocont.2013.01.003
[5] Mohammad Shamsuzzoha (2013), doi:10.1021/ie401808m
[6] F. Haugen (2012), doi:10.4173/mic.2012.4.3
[7] H. Kala, S. Abirami, S. Muthumari and S. Venkatesh (2014), doi:10.3923/jas.2014.1570.1575
[8] Mohammad Shamsuzzoha (2014), doi:10.1007/s11814-014-0237-6
[9] Bernt Lie (2013), doi:10.1201/b14561-16
[10] Md Nishat Anwar, M. Shamsuzzoha and Somnath Pan (2015), doi:10.1007/s13369-015-1582-4
[11] Thiruppathi. K, Lakshmi Ponnusamy, R. Kirubagaran and M. A. Atmanand (2013), doi:10.1109/ISPCC.2013.6663462
[12] Mohammad Shamsuzzoha (2016), doi:10.1007/s11771-016-3105-1
[13] Chriss Grimholt and Sigurd Skogestad (2012), doi:10.3182/20120328-3-IT-3014.00003
[14] Srinibash Swain and Partha Sarathi Khuntia (2017), doi:10.21833/ijaas.2017.08.020
[15] A. M. RIBEIRO and R. B. SANTOS (2017), doi:10.5151/chemeng-cobeqic2017-454
[16] Kratika Kanwal and Madhusudan Singh (2016), doi:10.1109/POWERI.2016.8077326
[17] Maedeh Roodpeyma, Selma E. Guigard and Warren H. Stiver (2018), doi:10.1016/j.supflu.2017.12.029
[18] Christer Dalen and David Di Ruscio (2018), doi:10.3390/a11060086
[19] Ángeles Hoyo, José Luis Guzmán and Manuel Berenguel (2018), doi:10.1016/j.ifacol.2018.06.137
[20] Chriss Grimholt and Sigurd Skogestad (2018), doi:10.1016/j.jprocont.2018.06.011
[21] Ryszard S. Romaniuk, Maciej Linczuk, Jakub Sobecki, Wojciech Walendziuk and Adam Idzkowski (2017), doi:10.1117/12.2280733
[22] S awomir Jaszczak and Joanna Ko odziejczyk (2014), doi:10.1007/978-3-319-07173-2_18
[23] Sigurd Skogestad and Chriss Grimholt (2012), doi:10.1007/978-1-4471-2425-2_5
[24] Kishore Bingi, Rosdiazli Ibrahim, Mohd Noh Karsiti, Sabo Miya Hassan and Vivekananda Rajah Harindran (2020), doi:10.1007/978-3-030-33934-0_2
[25] Panos C. Papageorgiou, Konstantinos F. Krommydas and Antonio T. Alexandridis (2020), doi:10.3390/en13061373
References:
[1] Haugen, F., (2010). The Good Gain method for PID controller tuning, TechTeach, http://techteach.no/publications/articles/good_gain_method/good_gain_method.pdf.
[2] Hägglund, T. Åström, K.J. (2002). Revisiting the Ziegler-Nichols´ Tuning Rules for PI Control, Asian J. Of Control, 4:364--380.
[3] Luyben, W. Luyben, M. (1997). Essentials of Process Control, McGraw-Hill, New York.
[4] O´Dwyer (2003). A Handbook of Controller Tuning Rules, Imperial College Press, London.
[5] Seborg, D., Edgar, T., Mellichamp, D. (2004). Handbook of Controller Tuning Rules, Process Dynamics and Control.
[6] Shamsuzzoha, M., Skogestad, S., Halvorsen, I. (2010). On-Line PI Controller Tuning Using Closed-Loop Setpoint Response, In Proc. IFAC Conf. on dynamics and control of process systems processes.DYCOPS, Belgium, July.
[7] Skogestad, S. (2003). Simple analytic rules for model reduction and PID controller tuning, Journal of Process Control, 13(4):291--309 doi:10.1016/S0959-1524(02)00062-8
[8] Skogestad, S. (2004). Simple analytic rules for model reduction and PID controller tuning, Modeling, Identification and Control, .2:85--120 doi:10.4173/mic.2004.2.2
[9] Ziegler, J. Nichols, N. (1942). Optimum settings for automatic controllers, Trans. ASME, 64:759--768.
[10] Åström, K.J. Hägglund, T. (1995). PID Controllers: Theory, Design and Tuning, ISA.


BibTeX:
@article{MIC-2010-3-1,
  title={{Comparing PI Tuning Methods in a Real Benchmark Temperature Control System}},
  author={Haugen, Finn},
  journal={Modeling, Identification and Control},
  volume={31},
  number={3},
  pages={79--91},
  year={2010},
  doi={10.4173/mic.2010.3.1},
  publisher={Norwegian Society of Automatic Control}
};