“The Ski Base Structure Analyser (SSA)”

Authors: Dag A. Moldestad and Sveinung Løset,
Affiliation: NTNU
Reference: 2003, Vol 24, No 1, pp. 15-26.

Keywords: Image processing, tribology, roughness, ski, interferometry

Abstract: A Ski base Structure Analyser (SSA) utilising laser technology has been developed to analyse the detailed structure of a stone-ground ski base. The SSA displays the measured surface as an image with 739 x 570 pixels, where each pixel can have a grey level value from 0 to 255. The value of each pixel is proportional to the height at the corresponding point of the measured surface. Various roughness parameters can be calculated from the measured surface image in order to characterise the surface topography. Some of these parameters are described in this paper. Further the paper contains examples of calculated SSA parameters from a typically measured surface image using MATLAB.

PDF PDF (1455 Kb)        DOI: 10.4173/mic.2003.1.2

DOI forward links to this article:
[1] Felix Breitschädel, Øyvind Lund and Sveinung Løset (2010), doi:10.1016/j.proeng.2010.04.086
[2] Felix Breitschädel (2015), doi:10.1016/j.proeng.2015.07.212
[3] Leonid Kuzmin, Peter Carlsson and Mats Tinnsten (2010), doi:10.1080/19346182.2010.538399
[4] S.E. Jordan and C.A. Brown (2006), doi:10.1016/j.wear.2005.12.011
[5] Kalle Kalliorinne, Gustav Hinder, Joakim Sandberg, Roland Larsson, Hans-Christer Holmberg and Andreas Almqvist (2023), doi:10.3390/lubricants11100427
[1] CREATH, K. (1988). Phase-measurement interferometry techniques, In Progress in Optics XXVI.E. Wolf, Ed., Elsevier Science Publishers B.V, s. 349-393.
[2] HAMROCK, B.J. (1994). Fundamentals of fluid film lubrication, McGraw-Hill, New York, 690 p.
[3] MATHIA, T.G., MIDOL., A., LANTERI, P. LONGERAY, R. (1989). Topography, physico-chemistry and wear in sliding of ski soles in regard to rheology of snow, In Proceedings of Eurotrib 89, Elsevier, Amsterdam, pp. 253-260.
[4] MATHIA, T.G., ZAHOUANI, H. MIDOL, A. (1992). Topography, wear, and sliding functions of skis, International Journal of Machine Tools Manufacturing, Vol. 32, No. 1/2, pp. 263-266 doi:10.1016/0890-6955(92)90087-W
[5] MERCER, C.R. BEHEIM, G (1992). Phase-stepping fiber-optic projected fringe system for surface topography measurements, U.S. Patent No. 5,146,293, 6 p.
[6] MOLDESTAD, D.A. (1999). Some Aspects of Ski Base Sliding Friction and Ski Base Structure, Dr. thesis NTNU 1999:137, Norwegian University of Science and Technology, 198 p.

  title={{The Ski Base Structure Analyser (SSA)}},
  author={Moldestad, Dag A. and Løset, Sveinung},
  journal={Modeling, Identification and Control},
  publisher={Norwegian Society of Automatic Control}