MIC Archives:
1980 - 1989    
1990 - 1999    
2000 - 2009    
2010 - 2019    
2020 - 2029    

All MIC articles published during 2010 - 2019:

2019, Vol. 40, No. 4:
1.Muhammad R. U. Islam and Shaoping Bai, “Payload estimation using forcemyography sensors for control of upper-body exoskeleton in load carrying assistance”, pp. 189-198
2.Christer Dalen and David Di Ruscio, “Model-Free PI/PID Controller Tuning of Higher Order Nonlinear Dynamic Systems”, pp. 199-211
3.Ole Magnus Brastein, Bernt Lie, Carlos F. Pfeiffer and Nils-Olav Skeie, “Estimating uncertainty of model parameters obtained using numerical optimisation”, pp. 213-243

2019, Vol. 40, No. 3:
1.Liubomyr Vytvytskyi, Roshan Sharma and Bernt Lie, “Nonlinear observer for hydropower system”, pp. 133-142
2.Shadi Attar and Finn Haugen, “Dynamic model adaptation to an anaerobic digestion reactor of a water resource recovery facility”, pp. 143-160
3.Ana Ionesi, M. Hossein Ramezani and Jerome Jouffroy, “On-line parameter and state estimation of an air handling unit model: experimental results using the modulating function method”, pp. 161-176
4.Bjørn-Olav H. Eriksen and Morten Breivik, “Short-term ASV Collision Avoidance with Static and Moving Obstacles”, pp. 177-187

2019, Vol. 40, No. 2:
1.Niels C. Bender, Torben Ole Andersen and Henrik C. Pedersen, “Feasibility of Deep Neural Network Surrogate Models in Fluid Dynamics”, pp. 71-87
2.Daniel Hagen, Damiano Padovani and Martin Choux, “Enabling Energy Savings in Offshore Mechatronic Systems by using Self-Contained Cylinders”, pp. 89-108
3.Alexander Meyer Sjøberg and Olav Egeland, “An EKF for Lie Groups with Application to Crane Load Dynamics”, pp. 109-124
4.Ioannis Manganas, Torben Ole Andersen, Per Johansen and Lasse Schmidt, “Challenges in application of hybrid switched control to digital hydraulic motors”, pp. 125-132

2019, Vol. 40, No. 1:
1.Reggie Davidrajuh, Damian Krenczyk and Bozena Skolud, “Finding Clusters in Petri Nets. An approach based on GPenSIM”, pp. 1-10
2.Jan Fredrik Røsjordet and Geir Hovland, “Methods for Experimentally Determining Stiffness of a Multi-Axis Machining Centre”, pp. 11-25
3.Pekko Jaatinen, Jouni Vuojolainen, Niko Nevaranta, Rafal Jastrzebski and Olli Pyrhönen, “Control System Commissioning of Fully Levitated Bearingless Machine”, pp. 27-39
4.Vojtech Vesely, Adrian Ilka, Ladislav Korosi and Martin Ernek, “Master-slave H-Infinity robust controller design for synchronization of chaotic systems”, pp. 41-50
5.Rolf ErgonQuantitative genetics state-space modeling of phenotypic plasticity and evolution”, pp. 51-69

2018, Vol. 39, No. 4:
1.Sindre Fossen and Thor I. Fossen, “eXogenous Kalman Filter (XKF) for Visualization and Motion Prediction of Ships using Live Automatic Identification System (AIS) Data”, pp. 233-244
2.Niels Henrik Pedersen, Sören Christian Jensen, R.H. Hansen, Anders Hedegaard Hansen and Torben Ole Andersen, “Control of an Energy Efficient Hydraulic Cylinder Drive with Multiple Pressure Lines”, pp. 245-259
3.Asanthi Jinasena, Ali Ghaderi and Roshan Sharma, “Modeling and Analysis of Fluid Flow through A Non-Prismatic Open Channel with Application to Drilling”, pp. 261-272
4.Christer Dalen and David Di Ruscio, “A Novel Process-Reaction Curve Method for Tuning PID Controllers”, pp. 273-291

2018, Vol. 39, No. 3:
1.Jan Kucera and Geir Hovland, “Tail Removal Block Validation: Implementation and Analysis”, pp. 151-156
2.Lars Grimstad and Pål J. From, “Software Components of the Thorvald II Modular Robot”, pp. 157-165
3.Niels Henrik Pedersen, Per Johansen, Anders Hedegaard Hansen and Torben Ole Andersen, “Model Predictive Control of Low-Speed Partial Stroke Operated Digital Displacement Pump Unit”, pp. 167-177
4.Dag Fritzson, Robert Braun and Jan Hartford, “Composite modelling in 3-D mechanics utilizing Transmission Line Modelling (TLM) and Functional Mock-up Interface (FMI)”, pp. 179-190
5.Sondre Sanden Tørdal, Jan Thomas Olsen and Geir Hovland, “The Norwegian Motion-Laboratory”, pp. 191-208
6.Dag FritzsonTransient conformal TEHL algorithms for multibody simulation”, pp. 209-232

2018, Vol. 39, No. 2:
1.Geir Ole Tysse and Olav Egeland, “Dynamic Interaction of a Heavy Crane and a Ship in Wave Motion”, pp. 45-60
2.Lothar Wöll, Georg Jacobs and Achim Kramer, “Lifetime Calculation of Irregularly Oscillating Bearings in Offshore Winches”, pp. 61-72
3.Søren Ketelsen, Lasse Schmidt, Viktor Hristov Donkov and Torben Ole Andersen, “Energy Saving Potential in Knuckle Boom Cranes using a Novel Pump Controlled Cylinder Drive”, pp. 73-89
4.Niels Henrik Pedersen, Per Johansen and Torben Ole Andersen, “Challenges with Respect to Control of Digital Displacement Hydraulic Units”, pp. 91-105
5.Geir-Arne Moslått, Michael R. Hansen and Nicolai Sand Karlsen, “A model for torque losses in variable displacement axial piston motors”, pp. 107-114
6.Jan Einar Gravdal, H.B. Siahaan and Knut Steinar Bjørkevoll, “Limiting Factors for the Ability to Achieve Accurate Pressure Control in Long Wells”, pp. 115-129
7.Dan Sui and Vebjørn Haraldstad Langåker, “Downhole Temperature Modeling for Non-Newtonian Fluids in ERD Wells”, pp. 131-149

2018, Vol. 39, No. 1:
1.Petter H. Gøytil, Michael R. Hansen and Geir Hovland, “Iterative Learning Applied to Hydraulic Pressure Control”, pp. 1-14
2.Morten Hovd and Sorin Olaru, “Parameter-dependent PWQ Lyapunov function stability criteria for uncertain piecewise linear systems”, pp. 15-21
3.Christian Nørgård, Michael Møller Bech, Torben Ole Andersen and Jeppe Hals Christensen, “Flow Characteristics and Sizing of Annular Seat Valves for Digital Displacement Machines”, pp. 23-35
4.Christer Dalen and David Di Ruscio, “A Semi-Heuristic Process-Reaction Curve PID Controller Tuning Method”, pp. 37-43

2017, Vol. 38, No. 4:
1.Geir Hovland and Jan Kucera, “Nonlinear Feedback Control and Stability Analysis of a Proof-of-Work Blockchain”, pp. 157-168
2.Ruiqin Li, Shusen Wang, Dabao Fan, Yuting Du and Shaoping Bai, “Dynamic Modeling of a 2-RPU+2-UPS Hybrid Manipulator for Machining Application”, pp. 169-184
3.Christer Dalen and David Di Ruscio, “PD/PID controller tuning based on model approximations: Model reduction of some unstable and higher order nonlinear models”, pp. 185-197

2017, Vol. 38, No. 3:
1. Ellen Nordgård-Hansen, Rune Schlanbusch and Thore Jarle Sørensen, “Modeling of a lay-flat plastic hose extrusion process”, pp. 111-121
2.Jouni Vuojolainen, Niko Nevaranta, Rafal Jastrzebski and Olli Pyrhönen, “Comparison of Excitation Signals in Active Magnetic Bearing System Identification”, pp. 123-133
3.Ivan Pirir, Asanthi Jinasena and Roshan Sharma, “Model based flow measurement using venturi flumes for return flow during drilling”, pp. 135-142
4.Andreas Klausen, Roy Werner Folgerø, Kjell G. Robbersmyr and Hamid Reza Karimi, “Accelerated Bearing Life-time Test Rig Development for Low Speed Data Acquisition”, pp. 143-156

2017, Vol. 38, No. 2:
1.Lothar Wöll, Achim Feldermann and Georg Jacobs, “Sensitivity Analysis on the Reliability of an Offshore Winch Regarding Selected Gearbox Parameters”, pp. 51-58
2.Daniel Hagen, Witold Pawlus, Morten K. Ebbesen and Torben Ole Andersen, “Feasibility Study of Electromechanical Cylinder Drivetrain for Offshore Mechatronic Systems”, pp. 59-77
3.Sondre Sanden Tørdal and Geir Hovland, “Relative Vessel Motion Tracking using Sensor Fusion, Aruco Markers, and MRU Sensors”, pp. 79-93
4.David Di Ruscio and Christer Dalen, “Tuning PD and PID Controllers for Double Integrating Plus Time Delay Systems”, pp. 95-110

2017, Vol. 38, No. 1:
1.Mathias Hauan Arbo, Trygve Utstumo, Edmund Brekke and Jan T. Gravdahl, “Unscented Multi-Point Smoother for Fusion of Delayed Displacement Measurements: Application to Agricultural Robots”, pp. 1-9
2.Lelai Zhou, Shaoping Bai and Yibin Li, “Energy Optimal Trajectories in Human Arm Motion Aiming for Assistive Robots”, pp. 11-19
3.Anders Albert, Frederik S. Leira and Lars Imsland, “UAV Path Planning using MILP with Experiments”, pp. 21-32
4.Susantha Dissanayake, Roshan Sharma and Bernt Lie, “Third Order Reconstruction of the KP Scheme for Model of River Tinnelva”, pp. 33-50

2016, Vol. 37, No. 4:
1.Jesper Kirk Sørensen, Michael R. Hansen and Morten K. Ebbesen, “Numerical and Experimental Study of a Novel Concept for Hydraulically Controlled Negative Loads”, pp. 195-211
2.Christer Dalen and David Di Ruscio, “On closed loop transient response system identification”, pp. 213-223
3.Åke Kinnander, Martin Sjölund and Adrian Pop, “Industrial Evaluation of Integrated Performance Analysis and Equation Model Debugging for Equation-Based Models”, pp. 225-236
4.Espen Oland and Raymond Kristiansen, “A Decoupled Approach for Flight Control”, pp. 237-246
5.Ali M. H. Kadhim, Wolfgang Birk and Miguel Castano Arranz, “Dynamic Relative Gain Array Estimation using Local Polynomial Approximation Approach”, pp. 247-259

2016, Vol. 37, No. 3:
1.Dan Sui and Bernt Sigve Aadnøy, “Rate of Penetration Optimization using Moving Horizon Estimation”, pp. 149-158
2.Tomasz Klopot, Piotr Skupin, Dariusz Choinski, Rafal Cupek and Marcin Fojcik, “A metamorphic controller for plant control system design”, pp. 159-169
3.D.W.U. Perera, M. Anushka S. Perera, Carlos F. Pfeiffer and Nils-Olav Skeie, “Structural observability analysis and EKF based parameter estimation of building heating models”, pp. 171-180
4.Miodrag Spasic, Morten Hovd, Darko Mitic and Dragan Antic, “Tube Model Predictive Control with an Auxiliary Sliding Mode Controller”, pp. 181-193

2016, Vol. 37, No. 2:
1.Esten I. Grøtli and Tor A. Johansen, “Motion- and Communication-Planning of Unmanned Aerial Vehicles in Delay Tolerant Network using Mixed-Integer Linear Programming”, pp. 77-97
2.D.W.U. Perera and Nils-Olav Skeie, “Modeling and Simulation of Multi-Room Buildings”, pp. 99-111
3.T. Roinila, R. Luhtala, T. Salpavaara, J. Verho, T. Messo and M. Vilkko, “Rapid High-Frequency Measurements of Electrical Circuits by Using Frequency Mixer and Pseudo-Random Sequences”, pp. 113-119
4.Anders Lyngvi Fougner, Konstanze Kölle, Nils Kristian Skjærvold, Nicolas-Andreas L. Elvemo, Dag Roar Hjelme, Reinold Ellingsen, Sven Magnus Carlsen and Øyvind Stavdahl, “Intraperitoneal Glucose Sensing is Sometimes Surprisingly Rapid”, pp. 121-131
5.Niko Nevaranta, Stijn Derammelaere, Jukka Parkkinen, Bram Vervisch, Tuomo Lindh, Markku Niemelä and Olli Pyrhönen, “Online Identification of a Two-Mass System in Frequency Domain using a Kalman Filter”, pp. 133-147

2016, Vol. 37, No. 1:
1.Witold Pawlus, Martin Choux and Michael R. Hansen, “Hydraulic vs. Electric: A Review of Actuation Systems in Offshore Drilling Equipment”, pp. 1-17
2.Stephan Neumann, Lothar Wöll, Achim Feldermann, Felix Strassburger and Georg Jacobs, “Modular System Modeling for Quantitative Reliability Evaluation of Technical Systems”, pp. 19-29
3.Jing Zhou, Jan Einar Gravdal, Per Strand and Svein Hovland, “Automated Kick Control Procedure for an Influx in Managed Pressure Drilling Operations”, pp. 31-40
4.Christer Dalen and David Di Ruscio, “Model-Free Predictive Anti-Slug Control of a Well-Pipeline-Riser”, pp. 41-52
5.Torstein A. Myhre and Olav Egeland, “Tracking a Swinging Target with a Robot Manipulator using Visual Sensing”, pp. 53-62
6.Adam L. Kleppe and Olav Egeland, “Inverse Kinematics for Industrial Robots using Conformal Geometric Algebra”, pp. 63-75

2015, Vol. 36, No. 4:
1.Mutaz Tuffaha and Jan T. Gravdahl, “Control-Oriented Model of a Generating Set Comprising a Diesel Engine and a Synchronous Generator”, pp. 199-214
2.Torben Ole Andersen, Henrik C. Pedersen and Michael R. Hansen, “Discrete Learning Control with Application to Hydraulic Actuators”, pp. 215-224
3.Sondre Sanden Tørdal, Andreas Klausen and Morten K. Bak, “Experimental System Identification and Black Box Modeling of Hydraulic Directional Control Valve”, pp. 225-235
4.Liubomyr Vytvytskyi, Roshan Sharma and Bernt Lie, “Model based control for run-of-river system. Part 1: Model implementation and tuning”, pp. 237-249
5.Liubomyr Vytvytskyi, Roshan Sharma and Bernt Lie, “Model based control for run-of-river system. Part 2: Comparison of control structures”, pp. 251-263

2015, Vol. 36, No. 3:
1.Jon Åge Stakvik, Michael R.P. Ragazzon, Arnfinn A. Eielsen and Jan T. Gravdahl, “On Implementation of the Preisach Model: Identification and Inversion for Hysteresis Compensation”, pp. 133-142
2.Niels Leergaard PedersenOn the Influence of Force Distribution and Boundary Condition on Helical Gear Stiffness”, pp. 143-155
3.Niko Nevaranta, Jukka Parkkinen, Tuomo Lindh, Markku Niemelä, Olli Pyrhönen and Juha Pyrhönen, “Online Identification of a Mechanical System in the Frequency Domain with Short-Time DFT”, pp. 157-165
4.Lelai Zhou, Shaoping Bai, Michael Skipper Andersen and John Rasmussen, “Modeling and Design of a Spring-loaded, Cable-driven, Wearable Exoskeleton for the Upper Extremity”, pp. 167-177
5.Christer Dalen, David Di Ruscio and Roar Nilsen, “Model-free optimal anti-slug control of a well-pipeline-riser in the K-Spice/LedaFlow simulator”, pp. 179-188
6.M. Anushka S. Perera, Tor A. Hauge and Carlos F. Pfeiffer, “Parameter and State Estimation of Large-Scale Complex Systems Using Python Tools”, pp. 189-198

2015, Vol. 36, No. 2:
1.Øyvind Magnussen, Morten Ottestad and Geir Hovland, “Multicopter Design Optimization and Validation”, pp. 67-79
2.Daniel de A. Fernandes, Asgeir J. Sørensen and Decio C. Donha, “Path Generation for High-Performance Motion of ROVs Based on a Reference Model”, pp. 81-101
3.Erik KyrkjebøDynamic and kinematic observers for output coordination control of Euler-Lagrange systems: A comparison and applications”, pp. 103-118
4.Radisa Jovanovic and Aleksandra Sretenovic, “Various multistage ensembles for prediction of heating energy consumption”, pp. 119-132

2015, Vol. 36, No. 1:
1.Magnus B. Kjelland and Michael R. Hansen, “Offshore Wind Payload Transfer Using Flexible Mobile Crane”, pp. 1-9
2.Audun Sanderud, Trygve Thomessen, Hisashi Osumi and Mihoko Niitsuma, “A Proactive Strategy for Safe Human-Robot Collaboration based on a Simplified Risk Analysis”, pp. 11-21
3.Bernhard Thiele, Alois Knoll and Peter Fritzson, “Towards Qualifiable Code Generation from a Clocked Synchronous Subset of Modelica”, pp. 23-52
4.M. Anushka S. Perera, Bernt Lie and Carlos F. Pfeiffer, “Structural Observability Analysis of Large Scale Systems Using Modelica and Python”, pp. 53-65

2014, Vol. 35, No. 4 - Special Edition on the Arctic DP Project:
1.Roger Skjetne, Lars Imsland and Sveinung Løset, “The Arctic DP Research Project: Effective Stationkeeping in Ice”, pp. 191-210
2.Ivan MetrikinA Software Framework for Simulating Stationkeeping of a Vessel in Discontinuous Ice”, pp. 211-248
3.Øyvind Kåre Kjerstad and Roger Skjetne, “Modeling and Control for Dynamic Positioned Marine Vessels in Drifting Managed Sea Ice”, pp. 249-262
4.Petter Norgren and Roger Skjetne, “Using Autonomous Underwater Vehicles as Sensor Platforms for Ice-Monitoring”, pp. 263-277
5.Joakim Haugen and Lars Imsland, “Autonomous Aerial Ice Observation for Ice Defense”, pp. 279-291
6.Qin Zhang and Roger Skjetne, “Image Techniques for Identifying Sea-Ice Parameters”, pp. 293-301
7.Bo Zhao and Roger Skjetne, “A Unified Framework for Fault Detection and Diagnosis Using Particle Filter”, pp. 303-315
8.Biao Su, Roger Skjetne and Tor Einar Berg, “Experimental and Numerical Investigation of a Double-Acting Offshore Vessel Performance in Level Ice”, pp. 317-332
9.Stian Ruud and Roger Skjetne, “Verification and Examination Management of Complex Systems”, pp. 333-346

2014, Vol. 35, No. 3:
1.Håkon Viumdal, Saba Mylvaganam and David Di Ruscio, “System Identification of a Non-Uniformly Sampled Multi-Rate System in Aluminium Electrolysis Cells”, pp. 127-146
2.Cong Dung Pham, Huynh Nhat Trinh Phan and Pål J. From, “Evaluation of Subjective and Objective Performance Metrics for Haptically Controlled Robotic Systems”, pp. 147-157
3.Fangwen Li, Peng Shi, Xingcheng Wang and Hamid Reza Karimi, “Robust H-Infinity Filtering for Networked Control Systems with Markovian Jumps and Packet Dropouts”, pp. 159-168
4.Francisco Palacios-Quiñonero, Josep Rubio-Massegu, Josep M. Rossell and Hamid Reza Karimi, “Recent Advances in Static Output-Feedback Controller Design with Applications to Vibration Control of Large Structures”, pp. 169-190

2014, Vol. 35, No. 2:
1.Martin Felix Jørgensen, Niels Leergaard Pedersen and Jens Nørkær Sørensen, “Comparison and Implementation of a Rigid and a Flexible Multibody Planetary Gearbox Model”, pp. 59-77
2.Wladimir Schamai, Lena Buffoni and Peter Fritzson, “An Approach to Automated Model Composition Illustrated in the Context of Design Verification”, pp. 79-91
3.Adrian Pop, Martin Sjölund, Adeel Ashgar, Peter Fritzson and Francesco Casella, “Integrated Debugging of Modelica Models”, pp. 93-107
4.Martin Felix Jørgensen, Niels Leergaard Pedersen and Jens Nørkær Sørensen, “Gear fatigue damage for a 500 kW wind turbine exposed to increasing turbulence using a flexible multibody model”, pp. 109-125

2014, Vol. 35, No. 1:
1.Martin Sjölund, Peter Fritzson and Adrian Pop, “Bootstrapping a Compiler for an Equation-Based Object-Oriented Language”, pp. 1-19
2.Guanglei WuStiffness Analysis and Optimization of a Co-axial Spherical Parallel Manipulator”, pp. 21-30
3.Shuai Wang, Jon Hovland and Rune Bakke, “Modeling and simulation of lab-scale anaerobic co-digestion of MEA waste”, pp. 31-41
4.D.W.U. Perera, Carlos F. Pfeiffer and Nils-Olav Skeie, “Modelling the heat dynamics of a residential building unit: Application to Norwegian buildings”, pp. 43-57

2013, Vol. 34, No. 4:
1.Morten K. Bak and Michael R. Hansen, “Analysis of Offshore Knuckle Boom Crane - Part One: Modeling and Parameter Identification”, pp. 157-174
2.Morten K. Bak and Michael R. Hansen, “Analysis of Offshore Knuckle Boom Crane - Part Two: Motion Control”, pp. 175-181
3.Anastasios M. Lekkas, Andreas Reason Dahl, Morten Breivik and Thor I. Fossen, “Continuous-Curvature Path Generation Using Fermat's Spiral”, pp. 183-198
4.Balazs Daniel, Trygve Thomessen and Peter Korondi, “Simplified Human-Robot Interaction: Modeling and Evaluation”, pp. 199-211

2013, Vol. 34, No. 3:
1.Finn Haugen, Rune Bakke and Bernt Lie, “Temperature Control of a Pilot Anaerobic Digestion Reactor”, pp. 99-117
2.David Di RuscioModel Predictive Control with Integral Action: A simple MPC algorithm”, pp. 119-129
3.Johannes Møgster, John-Morten Godhavn and Lars Imsland, “Using MPC for Managed Pressure Drilling”, pp. 131-138
4.Finn Haugen, Rune Bakke and Bernt Lie, “On-off and PI Control of Methane Gas Production of a Pilot Anaerobic Digestion Reactor”, pp. 139-156

2013, Vol. 34, No. 2:
1.Finn Haugen, Rune Bakke and Bernt Lie, “Adapting Dynamic Mathematical Models to a Pilot Anaerobic Digestion Reactor”, pp. 35-54
2.Roshan Sharma and Bjørn Glemmestad, “Optimal control strategies with nonlinear optimization for an Electric Submersible Pump lifted oil field”, pp. 55-67
3.Pål J. FromOn the Kinematics of Robotic-assisted Minimally Invasive Surgery”, pp. 69-82
4.Finn Haugen and Bernt Lie, “Relaxed Ziegler-Nichols Closed Loop Tuning of PI Controllers”, pp. 83-97

2013, Vol. 34, No. 1:
1.Jerome Jouffroy, Qiuyang Zhou and Oliver Zielinski, “On Active Current Selection for Lagrangian Profilers”, pp. 1-10
2.Rune Schlanbusch and Raymond Kristiansen, “Control of Spacecraft Formation with Disturbance Rejection and Exponential Gains”, pp. 11-18
3.Anders Hallanger and Ivar Ø. Sand, “CFD Wake Modelling with a BEM Wind Turbine Sub-Model”, pp. 19-33

2012, Vol. 33, No. 4:
1.Knut B. Kaldestad, Geir Hovland and David A. Anisi, “3D Sensor-Based Obstacle Detection Comparing Octrees and Point clouds Using CUDA”, pp. 123-130
2.Bo Wang, Peng Shi, Hamid Reza Karimi and Xiucheng Dong, “Stochastic Stability Analysis for Markovian Jump Neutral Nonlinear Systems”, pp. 131-139
3.Finn HaugenThe Good Gain method for simple experimental tuning of PI controllers”, pp. 141-152

2012, Vol. 33, No. 3:
1.Francisco Palacios-Quiñonero, Josep Rubio-Massegu, Josep M. Rossell and Hamid Reza Karimi, “Optimal passive-damping design using a decentralized velocity-feedback H-Infinity approach”, pp. 87-97
2.Rasmus M. Sørensen, Michael R. Hansen and Ole Ø. Mouritsen, “Numerical and Experimental Study of Friction Loss in Hydrostatic Motor”, pp. 99-109
3.Guanglei WuMultiobjective Optimum Design of a 3-RRR Spherical Parallel Manipulator with Kinematic and Dynamic Dexterities”, pp. 111-121

2012, Vol. 33, No. 2:
1.David Di RuscioDiscrete LQ optimal control with integral action: A simple controller on incremental form for MIMO systems”, pp. 35-44
2.Pål J. FromAn Explicit Formulation of Singularity-Free Dynamic Equations of Mechanical Systems in Lagrangian Form---Part one: Single Rigid Bodies”, pp. 45-60
3.Pål J. FromAn Explicit Formulation of Singularity-Free Dynamic Equations of Mechanical Systems in Lagrangian Form---Part Two: Multibody Systems”, pp. 61-68
4.Jaroslav Cibulka, Morten K. Ebbesen, Geir Hovland, Kjell G. Robbersmyr and Michael R. Hansen, “A Review on Approaches for Condition Based Maintenance in Applications with Induction Machines Located Offshore”, pp. 69-86

2012, Vol. 33, No. 1:
1.Morten Haastrup, Michael R. Hansen, Morten K. Ebbesen and Ole Ø. Mouritsen, “Modeling and Parameter Identification of Deflections in Planetary Stage of Wind Turbine Gearbox”, pp. 1-11
2.Roshan Sharma, Kjetil Fjalestad and Bjørn Glemmestad, “Optimization of lift gas allocation in a gas lifted oil field as non-linear optimization problem”, pp. 13-25
3.Bo Wang, Peng Shi, Hamid Reza Karimi and Jun Wang, “H-Infinity robust controller design for the synchronization of master-slave chaotic systems with disturbance input”, pp. 27-34

2011, Vol. 32, No. 4:
1.Seyed M. Hosseini, Tor A. Johansen and Alireza Fatehi, “Comparison of Nonlinearity Measures based on Time Series Analysis for Nonlinearity Detection”, pp. 123-140
2.Morten Haastrup, Michael R. Hansen and Morten K. Ebbesen, “Modeling of Wind Turbine Gearbox Mounting”, pp. 141-149

2011, Vol. 32, No. 3:
1.Lelai Zhou, Shaoping Bai, Michael R. Hansen and John Rasmussen, “Modeling of Human Arm Energy Expenditure for Predicting Energy Optimal Trajectories”, pp. 91-101
2.Markku Ohenoja and Kauko Leiviskä, “Multiple Property Cross Direction Control of Paper Machines”, pp. 103-112
3.Ulrik Jørgensen and Jan T. Gravdahl, “Observer Based Sliding Mode Attitude Control: Theoretical and Experimental Results”, pp. 113-121

2011, Vol. 32, No. 2:
1.Michael Basin, Juan J. Maldonado and Hamid Reza Karimi, “Mean-Square Filtering for Polynomial System States Confused with Poisson Noises over Polynomial Observations”, pp. 47-55
2.Francisco Palacios-Quiñonero, Josep M. Rossell and Hamid Reza Karimi, “Semi-decentralized Strategies in Structural Vibration Control”, pp. 57-77
3.Rafael Wisniewski and Christoffer Sloth, “Abstraction of Dynamical Systems by Timed Automata”, pp. 79-90

2011, Vol. 32, No. 1:
1.Søren E. Sørensen, Michael R. Hansen, Morten K. Ebbesen and Ole Ø. Mouritsen, “Implicit Identification of Contact Parameters in a Continuous Chain Model”, pp. 1-15
2.Magnus Komperød, John A. Bones and Bernt Lie, “A Sensor Fusion Algorithm for Filtering Pyrometer Measurement Noise in the Czochralski Crystallization Process”, pp. 17-32
3.Abozar Alabakhshizadeh, Yousef Iskandarani, Geir Hovland and Ole M. Midtgård, “Analysis, Modeling and Simulation of Mechatronic Systems using the Bond Graph Method”, pp. 35-45

2010, Vol. 31, No. 4:
1.Rune Schlanbusch, Raymond Kristiansen and Per J. Nicklasson, “Spacecraft Magnetic Control Using Dichotomous Coordinate Descent Algorithm with Box Constraints”, pp. 123-131
2.Mikkel M. Pedersen, Michael R. Hansen and Morten Ballebye, “Developing a Tool Point Control Scheme for a Hydraulic Crane Using Interactive Real-time Dynamic Simulation”, pp. 133-143
3.David Di RuscioOn Tuning PI Controllers for Integrating Plus Time Delay Systems”, pp. 145-164

2010, Vol. 31, No. 3:
1.Finn HaugenComparing PI Tuning Methods in a Real Benchmark Temperature Control System”, pp. 79-91
2.Jerome Jouffroy and Thor I. Fossen, “A Tutorial on Incremental Stability Analysis using Contraction Theory”, pp. 93-106
3.Lars Imsland, Pål Kittilsen and Tor S. Schei, “Model-Based Optimizing Control and Estimation Using Modelica Model”, pp. 107-121

2010, Vol. 31, No. 2:
1.Morten Hovd and Sorin Olaru, “Piecewise quadratic Lyapunov functions for stability verification of approximate explicit MPC”, pp. 45-53
2.Deshai Botheju, Bernt Lie and Rune Bakke, “Oxygen Effects in Anaerobic Digestion - II”, pp. 55-65
3.Finn HaugenControl of a Buoyancy-Based Pilot Underwater Lifting Body”, pp. 67-77

2010, Vol. 31, No. 1:
1.Johan Byström, Lars P. Lystad and Per-Ole Nyman, “Using Generalized Fibonacci Sequences for Solving the One-Dimensional LQR Problem and its Discrete-Time Riccati Equation”, pp. 1-18
2.Magnus Komperød and Bernt Lie, “Empirical Modeling of Heating Element Power for the Czochralski Crystallization Process”, pp. 19-34
3.Martin Choux and Geir Hovland, “Adaptive Backstepping Control of Nonlinear Hydraulic-Mechanical System Including Valve Dynamics”, pp. 35-44