“Catalyst Deactivation: Control Relevance of Model Assumptions”

Authors: Bernt Lie and David M. Himmelblau,
Affiliation: Telemark University College and University of Austin, Texas
Reference: 2000, Vol 21, No 4, pp. 241-253.

Keywords: Catalyst deactivation, dynamic models, population balance, activity model, analysis

Abstract: Two principles for describing catalyst deactivation are discussed, one based on the deactivation mechanism, the other based on the activity and catalyst age distribution. When the model is based upon activity decay, it is common to use a mean activity developed from the steady-state residence time distribution. We compare control-relevant properties of such an approach with those of a model based upon the deactivation mechanism. Using a continuous stirred tank reactor as an example, we show that the mechanistic approach and the population balance approach lead to identical models. However, common additional assumptions used for activity-based models lead to model properties that may deviate considerably from the correct one.

PDF PDF (1785 Kb)        DOI: 10.4173/mic.2000.4.3

References:
[1] FOGLER, H.S. (1992). Elements of Chemical Reaction Engineering, 2nd ed; Prentice-Hall: Englewood Cliffs, New Jersey.
[2] BURR, J.B. PETERSEN E.E. (1988). Activation, Deactivation and Poisoning of Catalysts, Academic: New York.
[3] LEVENSPIEL, O. (1972). Chemical Reaction Engineering, 2nd ed; John Wiley and Sons: New York.
[4] DANCKWERTS, P.V. (1953). Continuous flow systems: Distribution of Residence Times, Chem. Eng. Sci, Vol. 2, pp. 1-13.
[5] HULBURT, H.M. KATZ, S. (1964). Some problems in particle technology: A statistical mechanical formulation, Chem. Eng. Sci, Vol. 19, pp. 555-574 doi:10.1016/0009-2509(64)85047-8
[6] HIMMELBLAU, D.M. BISCHOFF, K.B. (1968). Process Analysis and Simulation: Deterministic Systems, John Wiley and Sons: New York.
[7] PETERSEN, E.E. PACHECO, M.A. (1984). Fundamental Deactivation Data from Laboratory Reactors, Chapter 19 in.Ed. DUDUKOVIC, M.P and MILLS, P.L. Chemical and Catalytic Reactor Modeling; ACS Symposium series 237, American Chemical Society: Washington, D.C.
[8] FRANKS, R.G E. (1972). Modeling and Simulation in Chemical Engineering, John Wiley and Sons: New York.
[9] SARKAR, P. GUPTA, S.K. (1992). Steady State Simulation of Continuous-Flow Stirred-Tank Slurry Propylene Polymerization Reactors, Polym. Eng. Sci, Vol. 32, No. 11, pp, 732-742.
[10] SARKAR, P. GUPTA, S.K. (1993). Dynamic Simulation of Propylene Polymerization in Continuous Flow Stirred Tank Reactors, Polym. Eng. Sci, Vol. 33, No. 6, pp. 363-374 doi:10.1002/pen.760330610
[11] FERNÁNDEZ-SEMPERE, J., FONT-MONTESINOS, R. ESPEJO-ALCARAZ, O. (1995). Residence Time Distribution for Unsteady-State Systems, Chemical Engineering Science, Vol. 50, No. 2, pp. 223-230 doi:10.1016/0009-2509(94)00230-O
[12] LAIDLER, K.J. (1987). Chemical Kinetics, Third edition; Harper and Row: New York.
[13] ZUCCHINI, U. CECCHIN, G., (1983). Control of Molecular-Weight Distribution in Polyolefins Synthesized with Ziegler-Natta Catalytic Systems, Adv. Polym. Sci., 1983, Vol. 51, Springer-Verlag: Berlin.
[14] SOARES, J.B.P. HAMIELEC, A.E. (1996). Copolymerization of olefins in a series of continuous stirred-tank slurry-reactors using heterogeneous Ziegler-Natta and Metallocene catalyst, I. General dynamic mathematical model. Polymer Reaction Engineering, No. 4..2 and 3, pp. 153-192.
[15] STEPHENSON, G. (1985). Partial Differential Equations for Scientists and Engineers, 3rd ed; Longman: London.


BibTeX:
@article{MIC-2000-4-3,
  title={{Catalyst Deactivation: Control Relevance of Model Assumptions}},
  author={Lie, Bernt and Himmelblau, David M.},
  journal={Modeling, Identification and Control},
  volume={21},
  number={4},
  pages={241--253},
  year={2000},
  doi={10.4173/mic.2000.4.3},
  publisher={Norwegian Society of Automatic Control}
};